Chromatography Autosampler Vial Caps Only
Microsolv Technology Corporation Caps, Snap Top, with 1.00mm thick, Red PTFE / White Silicone Rubber / Red PTFE Septa, fitted in smooth, soft polyethylene, Natural Translucent Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
Soft polyethylene caps are more pliable than other Snap Caps and are easier to place on the vial. Popular choice when using a large number of caps at one time. These caps may not seal as well as other Snap Caps and should be used with sample solvents with low volatility. This septa was designed for specific, older instruments such as Agilent 1050 and to provide extra cleaning when "wiping" a needle. Also provides a small degree of better resealing after injection compared to Silicone Rubber / PTFE Septa.
Microsolv Technology Corporation Caps, Snap Top, with Red PTFE / White Silicone Rubber / Red PTFE Septa, fitted in smooth, polyethylene, Green Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
This septa was designed for specific, older instruments such as Agilent 1050 and to provide extra cleaning when "wiping" a needle. Also provides a small degree of better resealing after injection compared to Silicone Rubber / PTFE Septa.
Microsolv Technology Corporation Caps, Headspace, Crimp Top, with White Silicone Rubber / Blue PTFE SPME Style Septa, fitted in Bimetallic, Magnetic, Blue Caps with 8mm center holes. For use with 20mm Crimp Top Headspace Vials. 100/PK.
Special Shape Septa with thick rubber outer ring (3mm) and thinned rubber center (1.5mm) provides a good seal with most 20mm crimp top Headspace vials. The target area on this Septa is easer for SPME needles to penetrate, minimizing broken or damaged needles. Recommended with CTC Pal and other autosamplers with SPME or Solid Phase Micro-Extraction injectors. Bimetallic Caps have a magnetic center and an aluminum outer ring that makes crimping them easier than all steel caps.
Chemglass Life Sciences Aluminum Seal, 11mm, Silver, PTFE/Silicone with Slit
Aluminum Seal, 11mm, Silver, PTFE/Silicone with Slit. The 11mm anodized aluminum seals are manufactured to fit all 11mm crimp top vials and are available in a variety of colors. Pure Silicone laminated with .005 of PTFE. Recommended when multiple injections are required. Resist coring and excellent resealing qualities. Medium durometer silicone with .003 silicone laminated on both sides. Great for trace analysis work. Resist coring and good resealing characteristics. Use with auto samplers with blunt tip syringes.
Chemglass Life Sciences Poly Crimp Seal, 11mm, Clear Cap, Molded Septum
Poly Crimp Seal, 11mm, Clear Cap, Molded Septum. A crimp cap constructed of plastic that fits virtually any 11mm crimp sample vial. Use a standard crimping tool to securely crimp the Poly Crimp seal onto any crimp top vial. The Poly Crimp seal also permits an airtight seal by hand without crimping. Although the Poly Crimp seal can work with any crimp top vial, the tighter manufacturing tolerances and quality assurance program with the vials supplied by Chemglass certifies better performance when the cap is used with Chemglass supplied vials. Vials Compatible with Poly Crimp Seals: CV-1108-1232: Vial, 2.0mL, Clear, Snap Seal, 12 x 32mm, 11mm Crimp CV-1168-1232 : Vial, Standard Opening Crimp Top, Clear, 2.0mL, 12 x 32mm, 11mm Crimp CV-1185-1232 : Vial, Large Opening Crimp Top, Clear, 2.0mL, 12 x 32mm, 11mm Crimp CV-1200-1232 : Vial, Snap Ring, 2.0mL, Clear, 12 x 32mm, 11mm Crimp
Chemglass Life Sciences Poly Crimp Seal, 11mm, Red Cap, 10mil PTFE Septum
Poly Crimp Seal, 11mm, Red Cap, 10mil PTFE Septum. A crimp cap constructed of plastic that fits virtually any 11mm crimp sample vial. Use a standard crimping tool to securely crimp the Poly Crimp seal onto any crimp top vial. The Poly Crimp seal also permits an airtight seal by hand without crimping. Although the Poly Crimp seal can work with any crimp top vial, the tighter manufacturing tolerances and quality assurance program with the vials supplied by Chemglass certifies better performance when the cap is used with Chemglass supplied vials. Vials Compatible with Poly Crimp Seals: CV-1108-1232: Vial, 2.0mL, Clear, Snap Seal, 12 x 32mm, 11mm Crimp CV-1168-1232 : Vial, Standard Opening Crimp Top, Clear, 2.0mL, 12 x 32mm, 11mm Crimp CV-1185-1232 : Vial, Large Opening Crimp Top, Clear, 2.0mL, 12 x 32mm, 11mm Crimp CV-1200-1232 : Vial, Snap Ring, 2.0mL, Clear, 12 x 32mm, 11mm Crimp
Chemglass Life Sciences Poly Crimp Seal, 11mm, Yellow Cap, Starburst Septum
Poly Crimp Seal, 11mm, Yellow Cap, Starburst Septum. A crimp cap constructed of plastic that fits virtually any 11mm crimp sample vial. Use a standard crimping tool to securely crimp the Poly Crimp seal onto any crimp top vial. The Poly Crimp seal also permits an airtight seal by hand without crimping. Although the Poly Crimp seal can work with any crimp top vial, the tighter manufacturing tolerances and quality assurance program with the vials supplied by Chemglass certifies better performance when the cap is used with Chemglass supplied vials. Vials Compatible with Poly Crimp Seals: CV-1108-1232: Vial, 2.0mL, Clear, Snap Seal, 12 x 32mm, 11mm Crimp CV-1168-1232 : Vial, Standard Opening Crimp Top, Clear, 2.0mL, 12 x 32mm, 11mm Crimp CV-1185-1232 : Vial, Large Opening Crimp Top, Clear, 2.0mL, 12 x 32mm, 11mm Crimp CV-1200-1232 : Vial, Snap Ring, 2.0mL, Clear, 12 x 32mm, 11mm Crimp
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE, low durometer Septa, bonded in "knurled", polypropylene, Green Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK.
The Septa is bonded to the cap for increased performance of penetration that prevents "septa plunge" and prevents them from falling out or dislodging in the cap during transportation.Very popular and useful for HPLC or GC; save money compared to "Certified" brands.
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE Septa, fitted in smooth sided, Robo Style, soft polypropylene, Yellow Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 1000/CS.
Caps, Screw Top, with Silicone Rubber / PTFE Septa, fitted in smooth sided, Robo Style, soft polypropylene, Yellow Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 1000/CS.
Microsolv Technology Corporation Caps, Snap Top, with Silicone Rubber / PTFE Septa, fitted in smooth, polyethylene, Red Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
This cap is our original Snap Cap and has been on the market for 30 years.
Microsolv Technology Corporation Caps, Snap Top, with Silicone Rubber / PTFE Septa, fitted in smooth, polyethylene, Red Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 1000/CS.
This cap is our original Snap Cap and has been on the market for 30 years.
Microsolv Technology Corporation Caps, Screw Top, with Orange Red Rubber / PTFE Septa, bonded in "knurled", polypropylene, Blue Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK.
Orange-Red Silicone Rubber is more economical White Silicone Rubber and softer than Natural Red Rubber which is better for your autosamplers, minimizing damaging needles and injections systems.
Microsolv Technology Corporation Caps, Screw Top, Solid, with a Red-Orange Silicone Rubber / TEF liner, in "knurled", closed Blue Caps. For use with 9-425mm thread,12x32mm autosampler vials. MicroSolv Brand 1000/CS.
Silicone Rubber with TEF liner is inert lowers the cost. Liner is 53° Shore D, 0-2mm. Solid top turns autosampler vials into storage vials.
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE Partial Pre-Slit (Y Shape) Septa, fitted in "knurled" polypropylene, Blue Caps. For use with 9-425 thread, 12x32mm autosampler vials. Excellent for GC and GCMS. 100/PK.
Partial slit, only in the rubber leaves PTFE to form an evaporation barrier making this a good choice for volatile samples when an autosampler requires a pre-slit Septa.Y shaped partial slit allows for better "resealing" of rubber after initial injection. C
Microsolv Technology Corporation Caps, Headspace, Crimp Top, with White Silicone Rubber / Blue PTFE SPME Style Septa, fitted in Steel, Magnetic, Gold Caps with 8mm center holes. For use with 20mm Crimp Top Headspace Vials. 100/PK.
Special Shape Septa with thick rubber outer ring (3mm) and thinned rubber center (1.5mm) provides a good seal with most 20mm crimp top Headspace vials. The target area on this Septa is easer for SPME needles to penetrate, minimizing broken or damaged needles. Recommended with CTC Pal and other autosamplers with SPME or Solid Phase Micro-Extraction injectors.